User manual

A
A-30
McDATA Sphereon™ 4500 Fabric Switch Product Manager User Manual
Product Manager Messages
T
Message The add firmware process has been aborted.
Description User has ended the add firmware process.
Action N/A. An informational message.
Message The data collection process failed.
Description An error occurred in the data collection process.
Action Contact support personnel.
Message The data collection process has been aborted.
Description User has ended the data collection process.
Action N/A. An informational message.
Message The default zone must be disabled to configure.
Description The message displays when the user attempts to change the
interoperability mode to open fabric and the default zone is enabled
Action Disable the default zone and repeat the operation.
Message The director did not accept the request.
Description The director did not handle the action.
Action Try action again. If problem persists, contact your support
representative.