User manual

A
A-27
Product Manager Messages
Message Port cannot swap to itself.
Description Port addresses entered in the Swap Ports dialog box are the same.
Action Make sure that address in the first and second port address fields are
different.
Message Port diagnostics cannot be performed on an inactive port.
Description This displays when port diagnostics is run on a port in an inactive
state.
Action Run the diagnostics on an active port.
Message Port speeds cannot be configured at a higher rate than the
director/switch speed.
Description This displays when you configure a port to 2 GB/sec and the director
speed is set to 1 Gb/sec.
Action Set the director speed to 2 Gb/sec in the Configure Operating Parameter
dialog box.
Message Product Manager error <number>.
Description The director Product Manager encountered an internal error and
cannot continue.
Action Report the problem to support personnel.
Message Product Manager instance is currently open.
Description A Product Manager window is currently open.
Action Informational message only.