User manual

A
A-11
Product Manager Messages
Message Cannot start firmware install while CTP synchronization is in
progress.
Description CTP synchronization is in progress while you are attempting to
install firmware.
Action Wait for the CTP synchronization to complete before starting the
firmware install.
Message Cannot start port diagnostics.
Description Port diagnostics cannot be started. The link is down or busy.
Action Retry the operation later. If the condition persists, contact support
personnel.
Message Cannot swap an uninstalled port.
Description A port swap cannot be performed when the port card is not installed.
Action Perform a swap only on a port that is installed.
Message Click OK to remove all contents from log.
Description Requesting confirmation that you want all contents removed from
the log.
Action Click OK to continue or Cancel to cancel the operation.
Message Continuing may overwrite host programming. Continue?
Description Configurations sent from the host may be overwritten by EFCM.
Action Continuing will activate the current configuration, which may have
been configured by a FICON host.