User manual

A
A-4
McDATA Sphereon™ 4500 Fabric Switch Product Manager User Manual
Product Manager Messages
Message Cannot enable beaconing on a failed FRU.
Description Occurs when selecting Enable Beaconing option for a failed FRU.
Action Replace FRU and enable beaconing again or enable beaconing on
operating FRU.
Message Cannot enable beaconing while the system error light is on.
Description Beaconing cannot be enabled while the system error light is on.
Action Select Clear System Error Light from Product menu to clear error light,
then enable beaconing.
Message Cannot enable OpenTrunking while Enterprise Fabric Mode is
active and the switch is offline.
Description Enterprise Fabric mode is active and the switch or director is online
and user is attempting to enable OpenTrunking. This message only
displays if the optional OpenTrunking feature is installed.
Action Perform either of the following steps:
•Disable Enterprise Fabric Mode option by selecting the appropriate
fabric in the Fabric Tree portion of the EFC Manager window
(Fabrics tab) and then selecting Enterprise Fabric Mode from the
Fabrics menu. When the Enterprise Fabric Mode dialog box
displays, click Start and follow prompts to disable the feature.
• Set the switch or director offline through the Set Online State
dialog box. Display this dialog box by selecting Set Online State
from the Product Manager Maintenance menu.