User manual

A
A-2
McDATA Sphereon™ 4500 Fabric Switch Product Manager User Manual
Product Manager Messages
Message All FPM ports will be held inactive while the director is configured
to 2Gb/sec speed. Do you want to continue?
Description Intrepid 6064 director only. Occurs when FPM cards are installed in
the director and switch speed to set to 2Gb/sec in the Configure Switch
Parameters dialog box.
Action Replace FPM cards with UPM cards (cards operate at 1 and 2 Gb/sec)
or set the switch speed to 1 Gb/sec.
Message All port names must be unique.
Description A duplicate port name was entered. Every configured port name
must be unique.
Action Reconfigure the port with a unique name.
Message Another Product Manager is currently performing a firmware
install.
Description Only one firmware install to a specific director can take place at a
time.
Action Wait for the current firmware install to complete and try again.
Message Are you sure you want to delete firmware version?
Description Requesting confirmation to delete the firmware version. Firmware
library can hold only eight firmware versions.
Action Click Yes to confirm the firmware deletion or No to cancel the
operation.
Message Are you sure you want to delete this address configuration?
Description Confirmation to delete the selected address configuration.
Action Click Yes to confirm the deletion of the address configuration or No to
cancel the operation.