User manual

3
3-30
McDATA Sphereon™ 4500 Fabric Switch Product Manager User Manual
Configuring the Switch
Configure Open Trunking
This option is only available if the optional OpenTrunking feature is
installed and the firmware is version 05.00.00 or higher. Selecting this
option opens the Configure Open Trunking dialog box. For details on
enabling OpenTrunking and configuring such parameters as
congestion thresholds for ports, event notification options, and the
Low BB Credit Threshold, refer to OpenTrunking on page 6-12.
Export Configuration Report
Use this option to save an ASCII file of all currently saved
configuration data in switch NV_RAM to your hard drive or a
diskette. Use any desktop publishing application to import this ASCII
file for viewing or printing.
NOTE: This file cannot be used to set configuration parameters through the
Product Manager.
Data in the file includes:
• Product identification
Data input into the Configure Identification dialog box.
• Operating parameters
Data input into the Operating Parameters (Switch and Fabric) dialog
box.
• Port parameters
Data input into the Configure Ports dialog box.
• SNMP parameters
Data input into the Configure SNMP dialog box.
• Active zoning configuration
This specifies the active zone and zone members, if set, and
whether the default zone is enabled or disabled.