User manual

3
3-20
McDATA Sphereon™ 4500 Fabric Switch Product Manager User Manual
Configuring the Switch
If the Periodic Date/Time Synchronization check box is not selected,
you can set the EFC Server date and time manually.
Figure 3-7 Configure Date and Time Periodic Synchronization Dialog Box
To disable Periodic Date/Time Synchronization, click the check box
to remove the check mark, then click Activate. To re-enable
Periodic Date/Time Synchronization, click the check box to display
the check box, then click Activate.
NOTE: Click Activate to synchronize the date and time at the next update
period. Click Sync Now to synchronize the date and time immediately.
2. Perform one of the following options:
Option 1: To immediately synchronize the switch date and time
with the EFC Server, click Sync Now. Make sure that a check mark
is in the Periodic Date/Time Synchronization check box.
NOTE: If you click Activate, the date and time synchronize at the next
update period.
Option 2: To synchronize the switch date and time with a specific
date and time that you enter:
a. Make sure that Periodic Date/Time Synchronization is disabled
(no check). Refer to Figure 3-8.