User manual

3
Configure Ports
3-13
Configuring the Switch
Configure Ports
Procedure
To configure ports, use the following steps:
1. Select Ports from the Configure menu on the Product Manager
menu bar.
The Configure Ports dialog box displays.
Figure 3-4 Configure Ports Dialog Box
Ports are numbered from 0 through 23.
2. Click a Name field and type a name that reflects the end device
connected through the port. For example, use “XYZ Server,”
where XYZ is the brand name of the server.
3. Block or unblock operation for a port by clicking the check box in
the Blocked column. When a check mark displays, the port is
blocked.
4. Enable or disable LIN alerts for the port by clicking the check box
in the LIN Alerts column. When a check mark displays, LIN alerts
are enabled.
NOTE: The factory default for LIN alerts is enabled.