User manual

2
2-28
Enterprise Operating System Command Line Interface User Manual
config
Command Example Root> config port show 4
Output This command displays as a table that includes the following
properties.
Output Example The output from the config.port.show command displays as follows.
Port Number: 4
Name: Sam’s tape drive
Blocked: false
Type: F Port
Speed: 2 Gb/sec
Rx BB Credits: 12
config.port.showPortAddr
Syntax showPortAddr
Purpose This command displays the port address configuration for all ports.
NOTE: The command show.port.showPortAddr on page 2-173 has functionality
that is the same as this command.
Port Number The port number.
Name The configured port name.
Blocked The blocked state. Valid values are true and false.
FAN The fabric address notification (FAN) state. Valid
values are true and false. (Sphereon 4300 and
Sphereon 4500 switches only.)
Type The port type. Valid values are:
•F Port
•E Port
•G Port
• Fx Port (Sphereon 4300 and Sphereon 4500 only)
• Gx Port (Sphereon 4300 and Sphereon 4500 only)
Speed The port speed. Valid values are 1 Gb/sec, 2 Gb/sec,
and Negotiate.
Rx BB Credits The number of configured Rx BB Credits.