User manual

2
2-16
Enterprise Operating System Command Line Interface User Manual
config
The output from the config.fencing.show Policy_1 command displays
as follows:
Name: Policy_1
Ports: E ports
Type: Protocol Error
Limit: 5
Period: 300 seconds
State: Disabled
config.fencing.showTypeTable
Syntax showTypeTable
Purpose This command displays the table of different fencing types that can
be assigned to a policy. This table is used for reference only.
Parameters This command has no parameters.
Command Example
Root> config fencing showTypeTable
Output Example The output from the config.fencing.showTypeTable command
displays as follows:
Number Fencing Policy Types
---------------------------------
1 Protocol Errors
config.ficonCUPZoning.addControlHost
Syntax addControlHost hostNodeWwn
Purpose This command adds a control host to the Control Host List used to
determine the FICON host(s) capable of viewing all ports. This list
overrides the FCZ port visibility mask. The maximum entries in this
list is 8.
Parameters This command has one parameter:
hostNodeWwn The node WWN of the desired control
host, entered in colon-delimited notation
(e.g., 01:02:03:04:05:06:07:08)