User manual

2
2-126
Enterprise Operating System Command Line Interface User Manual
perf
Interval: 30
Alert State: Disabled
perf.threshholdAlerts.counter.showStatisticTable
Syntax showStatisticTable
Purpose This command displays the table of different statistic counters that
can be added to a counter threshold alert. This table is used for
reference only.
This command has no parameters.
Command Example
Root> perf threshAlerts counter showStatisticTable
Output Example The output from the perf.thresholdAlerts.counter.showStatisticTable
command displays as follows.
Number Counter or Counter Set
------ ----------------------
1 Link Resets Sent
2 Link Resets Received
3 OLS Sent
4 OLS Received
5 Link Failures
6 Sync Losses
7 Signal Losses
8 Protocol Errors
9 Invalid Tx Words
10 CRC Errors
11 Discarded Frames
12 Frames Too Short
13 Delimiter Errors
14 Address ID Errors
15 Cls2 BusiedFrms
16 Cls2 RejectedFrms
17 Cls3 DiscardFrms
18 Phys Lnk Err Set
19 Lnk Seq Cnt Set
20 Logic Lnk Err Set
21 LIPS Detected
22 LIPS Generated