User manual

2
2-54
E/OS Command Line Interface User Manual
config
config.security.authentication.RADIUS.show
Syntax show
Purpose This command displays the current RADIUS server configuration.
Parameters This command has no parameters.
Command Example
Root> config security authentication RADIUS show
Output This command displays all three configured RADIUS servers.
Output Example The output for the config.security.authentication.RADIUS.show
command appears as follows:
Deadtime: 0
Index IP Address Port Attempts Timeout
----- ------------- ---- ---------- -------
1 1.1.1.1 1111 3 2
2 2.2.2.2 2222 3 2
3
config.security.authentication.RADIUS.timeout
Syntax timeout index seconds
Purpose This command configures the waiting time, in seconds, for a response
from the RADIUS server before retransmitting a packet. The default
value is 4 seconds.
In extreme cases, where E_Port or N_Port authentication occur on a
large number of ports with RADIUS, and a switch is coming online,
users may need to increase the timeout value so that all the ports can
log in.
Deadtime The amount of time a server is marked as “dead”.
Server The IP address and UDP port of the configured
RADIUS server.
Attempts The number of transmit attempts.
Timeout The timeout value for a server in seconds.