User manual

2
CLI Commands
2-51
config
Command Example Root> config security authentication port override 138
enable
config.security.authentication.port.show
Syntax show
Purpose This command displays a table displaying the outgoing override
state for each port.
Parameters This command has no parameters.
Command Example
Root> config security authentication port show
Output This command displays all valid user names in the local database for
the specified interface.
Output Example The output for the config.security.authentication.port.show command
appears as follows:
Port Override State
---- --------------
0 Default
1 Default
2 Enable
3 Default
4 Disable
config.security.authentication.RADIUS
Using this command, the Radius server database is configured for
authentication. The timeout, attempts, and dead time values are also
configured for Radius server.
config.security.authentication.RADIUS.attempts
syntax attempts index attempts
Purpose This command configures the number of attempts by an
authentication request to a RADIUS server if a response is not
Port The port number.
Override State The outgoing authentication override state.