User manual

2
CLI Commands
2-49
config
Parameters This command has one parameter:
Command Example
Root> config security authentication interface show Web
Output Example The output for the config.security.authentication.interface.show
command appears as follows:
Interface: Web
Outgoing: N/A
Incoming: N/A
Sequence: Local, RADIUS
config.security.authentication.interface.web.sequence
Syntax sequence method1 [method2]
Purpose This command sets the sequence used by the web interface for
authentication. When the preferred method cannot be contacted, the
backup method will be used to authenticate the web login.
Parameters This command has one required parameter, and one optional
parameter:
interface The interface that will be displayed. Valid values
for this parameter are:
cli
web
osms
api
serial
eport
nport
method1 This sets the preferred method of authentication
for the CLI interface. Accepted values are local or
RADIUS.
method2 This optional parameter sets the backup method of
authentication for the CLI interface. This backup
method is used when the preferred method cannot
be contacted. Accepted value is local.