User manual

2
2-48
E/OS Command Line Interface User Manual
config
NOTE: The SANtegrity Authentication feature key must be installed to
configure the FCCT key.
Parameters This command has no required parameters.
Command Example
Root> config security authentication interface osms
setKey
config.security.authentication.interface.serial.enhancedAuth
Syntax enhancedAuth enhancedAuthState
Purpose This command sets the enhanced serial authentication state.
Enhanced Serial Authentication requires users to enter a password
when gaining access to the serial port interface.
Parameters This command has one parameter:
Command Example
Root> config security authentication serial enhancedAuth
enable
config.security.authentication.interface.show
Syntax show interface
Purpose This command displays the settings in the local authentication
database for a single interface.
NOTE: The SANtegrity Authentication feature key must be installed to view
the E_Port, N_Port, and OSMS information.
enhancedAuthState This parameter enables and disables enhanced
authentication on the serial port interface.
Accepted values for this parameter are enable or
disable. Boolean 1 and 0 values may also be
substituted.