User manual

2
CLI Commands
2-37
config
Output The port configuration is shown as a table of properties. The
following properties are displayed:
Output Example
Port Original Addr Current Addr SwappedPort Num
---- ------------- ------------ ----------------
04 4
15 5
26 7 3
37 6 2
48 8
59 9
6a a
7b b
8c c
...
config.port.showCredits
Syntax showCredits
Purpose This command shows the BB_Credit Pool information.
Parameters This command has no parameters.
Command Example
Root> config port showCredits
Port The port number.
Original Addr The original port address of the port.
Current Addr The current port address of the port.
Swapped Port Num If the port is swapped with another port, it
will show the port number of the port it is
swapped with.