User manual

2-36

E/OS Command Line Interface User Manual

config

Output Example The output from the config.port.show command appears as follows:

Port Number: 4

Name: Sam’s tape drive

Blocked: false

Blocked Reason:

Type: F Port

Speed: 4G Burst

Rx BB_Credits: 12

config.port.showPortAddr

Syntax showPortAddr

Purpose This command displays the port address configuration for all ports.

NOTE: The command show.port.showPortAddr on page 2-229 has similar

functionality.

Parameters This command has no parameters.

Command Example

Root> config port showPortAddr

Speed The configured port speed. Valid values are:

1G – 1 Gb/sec

2G – 2 Gb/sec

4G – 4 Gb/sec (Sphereon 4400 and Sphereon 4700 only)

10G – 10 Gb/sec (XPM only)

Neg - Negotiate

4G Burst – 4 Gb/sec Burst (QPM only)

4G Sust – 4 Gb/sec Sustained (QPM only)

Neg Sust – Negotiate Sustained (QPM only)

Neg 2G Max – Negotiate 2 Gb/sec Maximum (QPM only)

Neg B 4G Max – Negotiate Burst 4 Gb/sec Maximum (QPM

only)

Rx BB_Credits The number of configured Rx BB_Credits.