User manual

2
CLI Commands
2-35
config
Parameters This command has one parameter:
Command Example
Root> config port show 4
Output This command output appears as a table that includes the following
properties:
portNumber Specifies the port number. Valid values are:
0–12 for the Sphereon 4300
0–15 for the Sphereon 3016
0–16 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–32 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
Port Number The port number.
Name The configured port name.
Blocked The blocked state. Valid values are true and false.
Blocked Reason The reason for port being blocked. Valid values are
‘Blocked temporarily, Internal’, ‘Blocked by user’, ‘Blocked by
hardware type change’, ‘Blocked by port fencing’.
FAN The Fabric Address Notification (FAN) state. Valid
values are enabled and disabled. (Sphereon 4300 and
Sphereon 4500 switches only.)
Type The port type. Valid values are:
F Port
E Port
G Port
Fx Port (Sphereon 4300, Sphereon 4400, Sphereon 4500, and
Sphereon 4700 only)
Gx Port (Sphereon 4300, Sphereon 4400, Sphereon 4500, and
Sphereon 4700 only)