User manual

2
2-34
E/OS Command Line Interface User Manual
config
Parameters This command has two required parameters:
Command Example
Root> config port rxCredits 8 40
config.port.show
Syntax show portNumber
Purpose This command displays the current configuration for the specified
port.
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0–15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–31 for the Sphereon 3232
0–31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
numBBCredits Specifies the number of Rx BB_Credits to assign
the specified port.
For the Sphereon 4300 and Sphereon 4500 the
RxCredits per port must be between 2 and 12. The
total number of Rx Credits assigned across all
ports must not exceed the maximum pool size of
150.
For the Intrepid family, the RxCredits per
FPM/UPM port must be between 1 and 60. The
RxCredits per XPM port must be between 4 and
400. There is no pool limitation.