User manual

2
CLI Commands
2-33
config
Parameters This command has two required parameters:
Command Example Root> config port name 4 Sam’s tape drive
config.port.rxCredits
Syntax rxCredits PortNumber RxCredits
Purpose This command sets the number of initial BB_Credits for a given port.
The number of credits assigned must fall between the minimum and
maximum allowed values for the port.
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0–15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–31 for the Sphereon 3232
0–31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
portName Specifies the name for the port. The port name must
not exceed 24 characters in length.