User manual

2
2-30
E/OS Command Line Interface User Manual
config
Parameters This command has no parameters.
Command Example
Root> config NSTools showSnapshot
Output Example The output from the config.NSTools.showSnapshot command appears
as follows:
Config.NSTools> showsnapshot
Snapshot Time: 02/27/2006 22:35:41
Saved NS Entries
----------------
690BDC
690BE0
690BE1
690BE2
690BE4
690BE8
config.openSysMS.setHostCtrlState
Syntax setHostCtrlState HostContrlState
Purpose This command enables or disables Open Systems Management
Server (OSMS) Host Control.
Parameters This command has one parameter:
Command Example
Root> config openSysMS setHostCtrlState enable
config.openSysMS.setState
Syntax setState osmsState
Purpose This command enables or disables the Open Systems Management
Server (OSMS) feature.
OSMS is a feature that allows host control and inband management
of the switch or director through a management application that
resides on an Open-Systems Interconnection (OSI) device.
HostContrlState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be substituted.