User manual

2
2-28
E/OS Command Line Interface User Manual
config
NOTE: The command show.NPIV.config on page 2-210 has functionality that
is the same as this command.
config.NSTools
The NSTools command on the configuration branch enters the
NSTools configuration branch. All commands under this branch
operate on the Nameserver snapshot database.
config.NSTools.clearSnapshot
Syntax clearSnapshot
Description This command clears the Nameserver database entries from the
snapshot database that was saved.
Refer to config.NSTools.saveSnapshot for saving the snapshot.
Parameters This command has no parameters.
Command Example
Root> config NSTools clearSnapshot
config.NSTools.saveSnapshot
Syntax saveSnapshot
Description This command captures a list of FC IDs in the local Nameserver
database along with the timestamp of the list created.
Parameters This command has no parameters.
Command Example
Root> config NSTools saveSnapshot
Output Example The output from the config.NSTools.saveSnapshot command appears as
follows:
config.NSTools> saveSnapshot
Saving snapshot of the NameServer Database ...
Snapshot Time: 09/15/2005 19:25:43