User manual

2
2-26
E/OS Command Line Interface User Manual
config
You can configure the number of allowed NPIV logins for a given
port and enable or disable the feature.
Valid values for the Login Limit are 1 to 256. When the feature is
enabled, NPIV number cannot be lowered if the NPIV devices have
been logged in already.
The Product Feature Enablement key that enables NPIV has to be
purchased from McDATA.
config.NPIV.maxPortIDs
Syntax maxPortIDs portNumber maxIDs
Purpose This command configures the maximum number of NPIV logins that
are allowed on the specified port.
Parameters This command has two parameters:
Command Example
Root> config NPIV maxPortIDs 128
Root> config NPIV portNumber 60
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0–15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–31 for the Sphereon 3232
0–31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
all - applies the maxIDs parameter value to every
port on the product.
maxIDs Specifies the maximum number of NPIV logins
allowed on the specified port.Valid values are in
the range 1–256.