User manual

2
CLI Commands
2-23
config
Command Example Root> config ficonms setMIHPTO 180
config.ficonMS.setState
Syntax setState ficonMSState
Purpose This command enables or disables the FICON Management Server.
The FICON Management Server feature key must be installed in
order to enable the FICON Management Server State.
The Sphereon 4300 and Sphereon 4500 switches do not accept this
command. This command is displayed on a Sphereon 3016 only if the
feature key is installed.
NOTE: If the FICON Management Server is enabled, the default
management style is the FICON Management Style. The Open Systems
Management Style cannot be used.
Parameters This command has one parameter:
Command Example
Root> config ficonMS setState 1
NOTE: The command config.features.ficonMS on page 2-10 has functionality
that is identical to this command.
config.ficonMS.show
Syntax show
Purpose This command shows the FICON MS settings.
Parameters This command has no parameters.
Command Example
Root> config ficonMS show
ficonMSState Specifies whether the FICON Management Server is
enabled. Valid values are enable and disable. Boolean 1
and 0 may be substituted as values.