User manual

2
2-22
E/OS Command Line Interface User Manual
config
config.ficonCUPZoning.show
Syntax show
Purpose This command displays the contents of the host control list and the
enabled state of FICON CUP Zoning.
Parameters This command has no parameters.
Command Example
Root> config ficonCUPZoning show
Output The data is displayed as a table that includes the following
information:
Output Example The output from the config ficonCUPZoning show command appears
as follows:
FICON CUP Zoning State: Enabled
Host Control List
-----------------------
01:02:03:04:05:06:07:08
09:0A:0B:0C:0D:0E:0F:00
NOTE: The command show.ficonCUPZoning on page 2-201 has functionality
that is identical to this command.
config.ficonMS.setMIHPTO
Syntax setMIHPTO timeout
Purpose This command sets the FICON MS MIHPTO value in seconds. The
default value is 180 seconds.
Parameters This command has one parameter:
FICON CUP Zoning
State
The enabled state of the FICON CUP Zoning
feature.
Host Control List List of 0-8 control hosts, displays “empty” for
control host list with no members.
timeout Valid values are 15, 30, 45, 60, 120, 180, 240, 300,
360, 420, 480, 540, and 600.