User manual

2
2-14
E/OS Command Line Interface User Manual
config
config.fencing.addPolicy
Syntax addPolicy name
Purpose This command configures a new fencing policy and assigns it a name.
The new policy is assigned default settings, which must be changed
before the policy is activated.
Refer to the command config.fencing.setParams on page 2-17 for
default settings.
Parameters This command has one parameter.
Command Example
Root> config fencing addPolicy Policy2
NOTE: The maximum number of policies supported is 14.
config.fencing.addPort
Syntax addPort name portNumber
Purpose This command adds a port to the specified fencing policy.
name Specifies the name of the new fencing policy. This
name can consist of any printable USASCII
characters up to a maximum length of 63
characters. This name is case-sensitive.