User manual

2
CLI Commands
2-13
config
Output The product feature data is displayed as a table that includes the
following properties.
Output Example The output from the config.features.show command appears as follows.
Installed Feature Set Feature State Exp
------------------------------ ------------------------------ -------- -----
Security Package
SANtegrity Binding Switch Binding Enabled
SANtegrity Binding Fabric Binding Active
SANtegrity Binding Enterprise Fabrics Active
SANtegrity Authentication SANtegrity Authentication Enabled
FICON Cascading Bundle
FICON Management Server FICON Management Server Enabled
FICON CUP Zoning FICON CUP Zoning Active
OpenTrunking OpenTrunking Active
NPIV Trial* NPIV Trial* Enabled* 27*
*You need to contact your local dealer to get the full feature.
NOTE: The command show.features on page 2-199 has functionality that is
identical to this command.
config.fencing
The fencing command on the configuration branch enters the fencing
configuration branch. All commands under this branch operate on
the port fencing feature.
Installed Feature
Set
The feature set installed using a feature key. Only
installed keys are displayed.
Feature Individual features within each set. In many cases,
there is only one feature within each feature set.
State The state of the individual feature. Fabric-wide
features are displayed as Active/Inactive. Features
related to the switch are displayed as
Enabled/Disabled.
Exp The remaining evaluation time in days for the trial
feature.