User manual

2
2-12
E/OS Command Line Interface User Manual
config
Parameters This command has one parameter:
Command Example
Root> config features openSysMS 1
NOTE: The command config.openSysMS.setState on page 2-30 has
functionality that is identical to this command.
config.features.openTrunking
Syntax openTrunking openTrunkingState
Purpose This command enables or disables the OpenTrunking feature. The
OpenTrunking feature key must be installed in order to enable open
trunking.
Parameters This command has one parameter:
Command Example
Root> config features openTrunking 1
NOTE: The command perf.openTrunking.setState on page 2-148 has
functionality that is identical to this command.
config.features.show
Syntax show
Purpose This command shows the product feature information configured for
this director or switch.
Parameters This command has no parameters.
Command Example
Root> config features show
osmsState Specifies whether the Open Systems Management
Server is enabled. Valid values are enable and disable.
Boolean 1 and 0 may be substituted as values.
openTrunkingState This parameter can be set to enable or disable the
OpenTrunking feature. Boolean 1 and 0 may be
substituted as values.