User manual

2
2-10
E/OS Command Line Interface User Manual
config
config.features.ficonMS
Syntax ficonMS ficonMSState
Purpose This command enables or disables the FICON Management Server.
The FICON Management Server feature key must be installed in
order to enable the FICON Management Server State.
Sphereon 4300 and Sphereon 4500 switches do not accept this
command. This command is displayed on Sphereon 3016 and 3216
switches only if the feature key is installed.
NOTE: If the FICON Management Server is enabled, the default
management style is the FICON Management Style. The Open Systems
Management Style cannot be used.
Parameters This command has one parameter:
Command Example
Root> config features ficonMS 1
NOTE: The command config.ficonMS.setState on page 2-23 has functionality
that is identical to this command.
config.features.installKey
Syntax installKey featureKey
Purpose This command installs a feature set based on a provided feature key.
The switch can be either offline or online when this command is
executed.
NOTE: If any currently installed features are being removed by the new
feature key, the switch must be offline when the command is given.
ficonMSState Specifies whether the FICON Management Server is
enabled. Valid values are enable and disable. Boolean 1
and 0 may be substituted as values.