User manual

2
CLI Commands
2-9
config
Parameters This command has one parameter:
Command Example
Root> config enterpriseFabMode setState 1
NOTE: Open Trunking should be disabled before activating Enterprise
Fabric Mode.
config.features.enterpriseFabMode
Syntax enterpriseFabMode enterpriseFabModeState
Purpose This command sets the Enterprise Fabric Mode state for the fabric.
The SANtegrity™ feature key must be installed to activate the
Enterprise Fabric Mode state.
Parameters This command has one parameter:
Command Example
Root> config features enterpriseFabMode 1
NOTE: The command config.enterpriseFabMode.setState on page 2-8 has
functionality that is identical to this command
enterpriseFabModeState Specifies whether enterpriseFabMode is
active. Valid values are activate and
deactivate. Boolean 1 and 0 may be
substituted as values.
enterpriseFabModeState Specifies whether enterpriseFabMode is
active. Valid values are activate and
deactivate. Boolean 1 and 0 may be
substituted as values.