User manual

2
CLI Commands
2-7
config
Parameters This command has one parameter:
Command Example
Root> config alias setWebState 1
or
Root> config alias setWebState disable
config.alias.showActive
Syntax showActive
Description This command displays all the alias entries that are available in the
active alias database.
Parameters This command has no parameters.
Output This command displays the currently associated WWNs and their
aliases that are in the active association list. Also, it displays the
current associations count and possible total associations count.
Output Example
Config.Alias> showActive
CLI Alias enabled state: Enabled
Web Alias enabled state: Disabled
Total associations possible: 250
Current associations: 4
WWN Alias
----------------------- ----------------
11:22:33:44:55:66:77:11 FirstSwitch
22:22:33:44:55:66:77:12 SecondSwitch
33:22:33:44:55:66:77:13 Row2Rack1Lower
44:22:33:44:55:66:77:11 Row2Rack1Upper
state The enabled/disabled state for displaying Aliases in
the Web interface. This parameter can be set to enable
or disable. Boolean 1 and 0 values may also be
substituted.