User manual

Introduction

1-19

Logging In and Logging Out

Using the commaDelim Command

Note that the output examples shown in the other sections of this

publication presume that commaDelim is off.

commaDelim

Syntax commaDelim enable

Purpose This command displays information in comma-delimited, rather than

tabular format. Tabular format is the default.

Description This command can be entered at any point in the command tree.

Parameter This command has one parameter:

Command Examples

Root> commaDelim true

Config> commaDelim 1

Config.Port> commaDelim false

Output Example Output displayed in commaDelim mode is as follows:

Root> show eventLog

Date/Time,Code,Severity,FRU,Event Data,

04/12/01 10:58A,375,Major,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,

04/12/01 9:58A,385,Severe,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,

04/11/01 7:18P,395,Severe,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,

Handling CLI Errors

Two types of errors detected by the CLI are:

• An error associated with the interface: For example, a keyword is

misspelled or does not exist.

enable Specifies the comma-delineated state for

output. Valid values are true and false. Boolean 1

and 0 may be substituted as values.