User manual

A
Error Messages
A-37
Action Some commands require that comma-delimited mode be active (e.g.
show.nameserverExt). Enable comma-delimited mode and re-issue
the command.
Message Error 244: Not allowed when Enterprise Fabric Mode is Active and
Switch is Online
Description This operation is not allowed while the switch is in Enterprise Fabric
Mode and the switch is Online.
Action Make sure Enterprise Fabric Mode is not enabled and the switch is
offline.
Message Error 245: Invalid increment value
Description The increment value specified is not between 1 and 70560.
Action Make sure the increment value given is between 1 and 70560.
Message Error 246: Invalid interval value
Description The interval value specified is not between 5 and 70560 minutes.
Action Make sure the increment value given is between 5 and 70560 minutes.
Message Error 247: Invalid counter number
Description The counter specified is not a valid number.
Action Use the table output by the command
perf.thresholdAlerts.counter.showStatisticTable on page 2-166 to find a
valid counter value.
Message Error 248: A counter must be assigned to this threshold alert
Description A counter must be assigned to an alert before it is enabled.
Action Use the command perf.thresholdAlerts.counter.setCounter on page 2-164
to set a counter before the alert is enabled.