User manual

A
Error Messages
A-33
Description Diagnostics cannot be run on an active E Port.
Action Block the port to run diagnostics.
Message Error 222: Invalid SNMP Community Index
Description The value entered for the SNMP community index is invalid.
Action The SNMP community index must be an integer in the range 1–6.
Make the appropriate changes and re-submit the command.
Message Error 223: Unknown Error
Description The switch did not accept the request.
Action Contact your service representative.
Message Error 224: Invalid Argument
Description One or more parameters are invalid for this command.
Action Consult this manual (Chapter 2, CLI Commands) for appropriate
parameter names. Parameters must be typed exactly to specification
to be recognized correctly by the CLI.
Message Error 226: Argument Is Too Long
Description One or more parameters are invalid for this command.
Action For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly by the CLI.
Message Error 227: Invalid SNMP Community Name
Description The value entered for the SNMP community name is invalid.