User manual

A
A-32
E/OS Command Line Interface User Manual
Description There are no attached nodes.
Action To add more members, attach more devices to the switch or add the
members by WWN or Domain ID and port.
Message Error 217: All Attached Nodes are in the Zone
Description All the attached nodes are already in the zone.
Action To add more members, attach more devices to the switch or add the
members by WWN or Domain ID and port.
Message Error 218: Invalid Port Number
Description The value entered for the port number is invalid
Action Enter a port number within the range supported by your director or
switch.
Message Error 219: Invalid Port Type
Description The port type configured is invalid.
Action A port may be configured to be an eport, gport, or fport. Be sure the
port is configured appropriately and re-submit the command. On the
Sphereon 4300 and Sphereon 4500 only, fxport and gxport types are
also supported. On the Sphereon 4300, the Fabric Capable feature
must be installed to configure a E_Port, G_Port, or Gx_Port.
Message Error 220: Cannot run diagnostics while a device is logged in to the
port
Description Diagnostics cannot be run while a device is logged into the port.
Action Block the port to run diagnostics.
Message Error 221: Cannot run diagnostics on an active E Port