User manual

A
Error Messages
A-29
Description Two policies of the same type cannot be enabled if they have the
same port type.
Action Make sure the policy that is being enabled doesn't have the same port
type as a policy that is enabled.
Message Error 196: Cannot enable two policies of the same type that contain
default scope
Description Two policies of the same type cannot be enabled if they are both
using the default ports.
Action Enable only one policy that is using the default ports.
Message Error 197: Port list contains no ports
Description The policy port list must contain ports or a port scope.
Action Add ports or a port scope to the policy.
Message Error 198: Duplicate Authentication Name
Description Authentication names must be unique.
Action Configure a unique authentication name.
Message Error 201: Change Authorization Request Failed
Description The switch did not accept the request to make a change to NVRAM.
Action Be sure all parameters have been entered correctly and re-submit.
Contact your service representative with further problems.
Message Error 202: Invalid Change Authorization ID
Description The switch will not accept a change request from this particular
client.