User manual

A
Error Messages
A-15
Description The request cannot be completed because a system diagnostic is
running.
Action Wait for the diagnostic to complete.
Message Error 105: Max Threshold Definitions Reached
Description The maximum number of total threshold alerts has already been
reached.
Action Remove a threshold alert before adding the new threshold alert. A
total of 16 counter and throughput threshold alerts is allowed.
Message Error 106: Invalid Threshold Scope
Description The scope of a threshold alert is not set to a valid state before the user
activates an alert.
Action Set the scope of the threshold alert, then try to activate the alert.
Message Error 107: Invalid Threshold State
Description The scope of a threshold alert must be set before the user activates an
alert.
Action Set the scope of the threshold alert, then try to activate the alert.
Message Error 108: Invalid TTA Type
Description The type of the throughput threshold alert has not been set.
Action Set the type of the TTA, then try to activate the alert.
Message Error 109: Invalid CTA Type
Description The type of the counter threshold alert has not been set.
Action Set the type of the CTA, then try to activate the alert.