User manual

2
2-256
E/OS Command Line Interface User Manual
show
Output Example The output from the show.thresholdAlerts.log command appears as
follows:
Date/Time Name Port Type Value Int
---------------- ------------- ----- ----------------- ----- ---
05/26/02 10:58A CTA Alert #4 2 Cls3 DiscardFrms 250 10
05/24/02 12:01A CTA Alert #4 2 Cls3 DiscardFrms 250 10
05/22/02 10:58A My test CTA 43 CRC Errors 35 30
05/20/02 08:01P TTA Test #3 2 Tx Util 85 120
03/01/02 02:58A CTA Alert #1 130 CRC Errors 100 60
show.zoning
Syntax zoning
Purpose This command shows the zoning configuration saved on the fabric.
Parameters This command has no parameters.
Command Example
Root> show zoning
Output The zoning configuration data is displayed as a table that includes
the following properties.
Output Example The output from the show.zoning command appears as follows:
LIPS Generated CTA - Loop Initialization
Primitives Generated
(Sphereon 4300 and 4500
only).
Value The increment or utilization value of the alert.
Interval The time interval of the alert.
Active ZoneSet The enabled status, name, and member zones of the
zone set.