User manual

2
2-252
E/OS Command Line Interface User Manual
show
Command Example Root> Config Syslog show
Syslog State: Disabled
Index IP Address Facility
----- --------------- --------
1 172.16.22.23 Local 0
2
3 180.77.66.55 Local 5
Log State
-------------------------- --------
Event Log Enabled
Open Trunking Re-Route Log Disabled
Link Incident Log Disabled
Security Log Enabled
Audit Log Enabled
Fabric Log Enabled
Embedded Port Frame Log Disabled
show.thresholdAlerts.alerts
Syntax alerts
Purpose This command provides the name, type, and enabled state of each
configured threshold alert, including both counter threshold alerts
(CTAs) and throughput threshold alerts (TTAs).
Parameters This command has no parameters.
Command Example
Root> show thresholdAlerts alerts
Output The threshold alert data appears as a table that includes the following
properties:
Name The name of the threshold alert, truncated to 45
characters.
Type The trigger statistic or threshold type of the alert
(abbreviated to 17 characters). These include:
Tx Util TTA - Transmit Utilization.
Rx Util TTA - Receive Utilization.
Tx/Rx Util TTA - Transmit or Receive
Utilization.
Link Resets Sent CTA - Link Resets Sent.
Link Resets Received CTA - Link Resets Received.