User manual

2
2-250
E/OS Command Line Interface User Manual
show
Web Enabled: Enabled
API Enabled: Enabled
HA Mode: Disalbed
API Management IP: 100.0.0.1
Domain ID offset: 96
Password Exp. Time: 365
show.system
Syntax system
Purpose This command displays a set of system attributes.
Parameters This command has no parameters.
Command Example
Root> show system
Output The system attributes are displayed as a table that includes the
following properties.
Name The system name. For more information, see
config.system.name on page 2-122.
Contact The system contact as set in the config.system.contact
command. For more information, see config.syslog on
page 2-117.
Description The system description. For more information, see
config.system.description on page 2-121.
Location The system description. For more information, see
config.system.location on page 2-122.
Serial Number The serial number for the system.
Type Number The type number for the system.
Model Name The model name for the system (for example,
Sphereon 4500).
Model Number The model number for the system. All products have
the model number 001, except 1 Gb sheet metal units,
which are 002.
EC Level The engineering change level installed.