User manual

2
2-248
E/OS Command Line Interface User Manual
show
State The state of the switch (for example, online or
offline).
R_A_TOV The resource allocation timeout value (R_A_TOV) as
set in the config.switch.raTOV command.
E_D_TOV The error detect timeout value (E_D_TOV) as set in
the config.switch.edTOV command.
Preferred Domain
Id
The domain ID as set in the config.switch.prefDomainId
command.
Switch Priority The switch priority as set in the config.switch.priority
command. For more information, see
config.switch.priority on page 2-111.
Speed The switch speed as set in the config.switch.speed
command. (This command is only applicable for the
Intrepid 6064 and So this information is only
available in intrepid 6064.) For more information, see
config.switch.speed on page 2-114.
Rerouting Delay The rerouting delay as set in the
config.switch.rerouteDelay command. For more
information, see config.switch.rerouteDelay on
page 2-112.
Interop Mode The interoperability mode as set in the
config.switch.interopMode command. For more
information, see config.switch.interopMode on
page 2-109.
Active Domain Id The active domain ID of the switch or director. This
ID may or may not be the same as the preferred
domain ID.
World Wide Name The WWN for the switch or director.
Insistent Domain
Id
Configured insistent domain ID state as set in the
config.switch.insistDomainId command. For more
information, see config.switch.insistDomainId on
page 2-108.
Domain RSCN Configured domain RSCN state as set in the
config.switch.domainRSCN command. For more
information, see config.switch.domainRSCN on
page 2-107.
Zoning RSCN Configured Zoning RSCN state as set in the
config.switch.zoningRSCN command. For more
information, see config.switch.webState on page 2-116.