User manual

2
CLI Commands
2-245
show
Output This command displays the following switch configuration data:
Output Example The output from the show.snmp.V3GroupTable command appears as
follows:
SNMPv3 State: Enabled
Index Username Model Group Name
----- -------------------------------- ----- ----------
1 User1 V1 Group1
2
3
4
5
6
show.snmp.viewTable
Syntax viewTable
Purpose This command displays the values for the VACM views that are
presently configured.
Parameters This command has no parameters.
Command Example
Root> show snmp viewTable
Output This command displays the following switch configuration data:
SNMPv3 State Indicates the status of SNMPv3 (Enabled or
Disabled).
Index The index number.
Username The username.
Model The security model.
Group Name The group name.
View Name The name of the view.
Type The type of the view.
Object ID The object ID.