User manual

2
CLI Commands
2-243
show
Config.SNMP> showTargetTable 1
Index: 1
Target IP: 172.19.16.169
UDP Port: 162
Community Name: public
MP Model: SNMPv1
Security Name: user1
Security Model: V1
Security Level: No Authentication and No Privacy
show.snmp.userTable
Syntax userTable [index]
Purpose This command displays the users configured presently in the USM
Table.
Parameters This command has no parameters.
Command Example
Root> show snmp userTable
SNMPv3 State Indicates the status of SNMPv3 (Enabled or
Disabled).
Index The index number.
Target IP The trap recipient IP.
UDP Port The UDP port for the trap recipient
Community The community name.
MP Model The messaging model.
Security Name The security name (username).
Security Model The security model.
Security Level The security level.