User manual

2
CLI Commands
2-241
show
Output Example The output from the show.security.switchBinding command appears as
follows:
Switch Binding State: Enabled and Restricting E Ports
00:11:22:33:44:55:66:77
88:99:AA:BB:CC:DD:EE:FF
11:55:35:45:24:78:98:FA
show.snmp.accessTable
Syntax accessTable [index]
Purpose This command displays the configured values for the Access Table.
Parameters This command has one optional parameter.
Command Example
Root> show snmp accessTable
Output Example The output from the show.snmp.accessTable command appears as
follows:
SNMPv3 State: Enabled
Index Group Name
----- ----------
1 group1
2
3
4 v1Group
5
6
7 v2Group
8
9
10 usmGroup
11 usmGroup
12
If the optional parameter, index is specified, the output from this
command contains the following information:
SNMPv3 State Indicates the status of SNMPv3 (Enabled or
Disabled).
Index Index of the access entry. Valid values are 1 to 6.
Group Name The group name.