User manual

2
2-240
E/OS Command Line Interface User Manual
show
Output The data is displayed as a table that includes the following
properties:
Output Example
ACL State: Disabled
Starting IP Address Ending IP Address
------------------- -----------------
110.80.1.1 110.80.255.255
110.81.1.10 110.81.1.255
200.11.15.1 200.11.255.128
show.security.switchBinding
Syntax switchBinding
Purpose This command displays the switch binding configuration.
Parameters This command has no parameters.
Command Example
Root> show security switchBinding
Output The switch binding configuration data is displayed as a table that
includes the following properties:
Switch ACL State The enabled state of the switch access control list.
Starting IP Address The starting IP address of a range in the access
control list.
Ending IP Address The ending IP address of a range in the access
control list.
Switch Binding
State
The switch binding state, which can have the
following values:
Disabled
Enabled and Restricting F_Ports
Enabled and Restricting E_Ports
Enabled and Restricting All Ports
Switch Binding
Membership List
The WWNs of the members of the active SBML.