User manual

2
2-238
E/OS Command Line Interface User Manual
show
Command Example Root> show security log
Output The security log data are displayed as a table that includes the
following properties:
Output Example The output from the show.security.log command appears as follows:
Reason Date/Time Trigger Level Category Count
------ --------------- --------------- ---------------------- -----
10000 04/12/01 10:58A Informational Successful Connection 375
Desc: EWS User Connected
Data: Usr=Administrator IPaddr=001.002.003.004 Role=admin
10305 04/11/01 01:03A Error Authorization Failure 1
Desc: IP Access Control List Violation
Data: IPaddr=172.072.016.097 SrcPort=0072 DestPort=0124
10300 04/02/01 08:30P Error Authorization Failure 3
Desc: Fabric Binding Mismatch
Data: Prt=0100 NbrW=02:15:F4:2A:11:0F:11:00 NbrDID=004 ErrDID=001
10411 03/31/01 02:24A Error Authentication Failure 1
Desc: OS Management Server Authentication Not Provided
Data: Port=0100 WWN=01:02:03:04:05:06:07:08
show.security.portBinding
Syntax portBinding
Purpose This command shows the port binding configuration for all ports.
Reason The reason code for the security event.
Date/Time The date and time when the event occurred.
Trigger Level The trigger level of the event. Possible values are
Informational, Security Change, or Error.
Category The event category message. Possible values are
Successful Connection, Disconnection, Configuration
Change, Authorization Failure, Authentication Failure, or
Reserved.
Count A cumulative count of events within a known period.
Desc A formatted string containing a description of the
event.
Data A formatted string containing additional or
event-specific data.