User manual

2
CLI Commands
2-237
show
show.security.fabricBinding
Syntax fabricBinding
Purpose This command displays the fabric binding configuration saved on the
fabric. The command performs the same function as the command
See config.security.fabricBinding.showActive on page 2-66..
Parameters This command has no parameters.
Command Example
Root> show security fabricBinding
Output The fabric binding configuration data is displayed as a table that
includes the following properties:
Output Example The output from the show.security.fabricBinding command appears as
follows:
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
show.security.log
Syntax log [clear]
Purpose This command shows the contents of the security log as maintained
in NV-RAM on the director or switch.
Parameters This command has one parameter:
Domain ID The domain ID of the Fabric Binding Membership
List (FBML) member. Valid domain IDs range from 1
to 239.
WWN The world wide name (WWN) of the FBML member
in colon-delimited hexadecimal notation.
Attachment Status Indicates whether the FBML member is Local,
Attached, or Unattached. For more information, see
Fabric Binding Membership Terminology on page 2-62.
clear This optional parameter causes all security log
entries to be cleared.