User manual

2
2-236
E/OS Command Line Interface User Manual
show
Command and
Output Examples
The following examples show the output returned by the three
methods of specifying the show.preferredPath.showPath command.
Single values for both parameters
Root> show preferredPath showPath 21 10
Preferred Path State: Enabled
Preferred Exit Port: Not Configured
Actual Exit Port: 45
destDomainId set to all
Root> show preferredPath showPath all 15
Preferred Path State: Enabled
Destination Domain Preferred Exit Port Actual Exit Port
------------------ ------------------- ----------------
1 23 23
3 24 No Path
4 23 23
17 12 No Source
sourcePort set to all
Root> show preferredPath showPath 1 all
Preferred Path State: Enabled
Source Port Preferred Exit Port Actual Exit Port
------------------ ------------------- ----------------
0 2 No Source
2 5 5
3 17 No Path
22 5 6
show.preferredPath.showState
Syntax showState
Purpose This command displays the state of the preferred path.
Parameters This command has one parameter:
Command Example
Root> show.preferredPath.showState
Preferred Path State Indicates the state of the preferred path (Enabled or
Disabled).