User manual

2
2-230
E/OS Command Line Interface User Manual
show
Output Example Port Original Addr Current Addr SwappedPort Num
---- ------------- ------------ ----------------
04 4
15 5
26 7 3
37 6 2
48 8
59 9
6a a
7b b
8c c
...
show.port.status
Syntax status
Purpose This command displays port status for all ports.
Parameters This command has no parameters.
Command Example
Root> show port status
Output The port status data is displayed as a table that includes the following
properties:
Original Addr The original port address of the port.
Current Addr The current port address of the port.
Swapped Port Num If the port is swapped with another port, it
will show the port number of the port it is
swapped with.
Port The port number.
State The port state (for example, Segmented E_Port,
Invalid Attachment, Not Installed, Online, Offline,
Not Operational, No Light, Testing, Port Failure,
Link Reset, or Inactive).