User manual

2
CLI Commands
2-227
show
Command Example Root> show port profile portNumber 138
Output The port profile information is displayed as a single output for an
individual port.
Port Number Port number.
Name Configured port name.
Blocked Blocked state. Valid values are true and false.
Blocked Reason Blocked reason. Valid values are "Blocked
temporarily, Internal","Blocked by user","Blocked by
hardware type change","Blocked by port fencing".
Operating Type Operating port type.
Operating Speed Operating port speed. Valid values are
Not Established
1G – 1 Gb/sec
2G – 2 Gb/sec
4G – 4 Gb/sec (Sphereon 4400 and Sphereon 4700 only)
10G – 10 Gb/sec (XPM only)
4G Sust – 4 Gb/sec Sustained (QPM only)
4G Burst – 4 Gb/sec Burst (QPM only)
For QPM inactive port, it displays "Supports Port
number (note: the sustained port number)"
Port WWN Port WWN.
Configured Type Configured port type.